Thursday, April 1, 2010

IEC 61850 on IPC@CHIP® at Hannover Messe, April 19-23, 2010

Beck IPC (Pohlheim, Germany), SystemCorp (Perth, Australia), and NettedAutomation (Karlsruhe, Germany) will present at the Hannover Messe 2010 (Hannover, Germany) in Hall 27 Booth E51 on 19.-23. April 2010 the IEC 61850 integrated on the IPC@CHIP®, compact modules and ruggedized IEDs for harsh environments based on IPC@CHIP®.

The IEC 61850 conformant products shown in Hannover are applicable for many domains of utility automation - to make the power delivery system smarter:

  • Smart Automation of Power Generation
    Monitoring, protection and control of process and equipment (reactive power control, condition monitoring of turbines, ...)
  • Smart Automation of Power Transmission
    Monitoring, protection and control of process and equipment (interlocking, condition monitoring of transformer and switch gears, ...)
  • Smart Automation of Power Distribution
    Monitoring, protection and control of process and equipment (fault location, power restoration, condition monitoring of transformer, ...)
  • Smart Automation of Vehicle to Grid
    Monitoring and control of process and equipment (charger station, condition monitoring of charging station, ...)
  • Smart Automation of Loads and Generation
    Monitoring and control of process and equipment (load control, active and reactive power control, ...)

Due to the fact that IEC 61850 / IEC 61400-25 define many common aspects of standardized information and information exchange services it is obvious that standard conformant products can be applied in many domains outside the power industry: in gas and oil transmission and distribution networks, and in any other industrial automation domain.

1 comment:

Peng said...

Hi Karlheinz, I will participate also this salon at Hannover Messe. See you there. - Peng LI